Stainless Steel Angle Bar has a high strength, temperature resistance, and corrosion resistance, as well as a smooth surface that is easy to clean and can withstand repeated sanitizing and sterilization. Tolerant tolerances are simple to machine, stamp, fabricate, and weld. It is a low-cost, high-performance material.
430 Stainless Steel Strip is an austenitic chromium-nickel-manganese stainless steel developed in the 1950s as a result of global nickel shortages. Manganese and nitrogen are partially substituted for nickel in the Type 201 composition.The following is the chemical composition of austenitic, non-magnetic stainless steel 430. It is composed of chromium (16% - 18%) and nickel (3.5% - 5.5%). It has a higher manganese (5.5%-7.5%) and nitrogen content.
Type 430 stainless steel pipe is non-hardenable steel containing straight chromium, and belongs to the ferritic group of steels. 430 stainless steel pipe is known for its good corrosion resistance and formability, coupled with practical mechanical properties. The molybdenum content in stainless steel 430 pipe enhances its corrosion resistance.
Type 430 is known to have moderate ductility limited forming, bending and welding characteristics and can be drawn to a moderate degree. This alloy is highly magnetic, resistant to scaling at 1500°F and has better resistance to dry sulphur-bearing gases than the chromium-nickel stainless type.
Grade 430 is a ferritic, straight chromium, non-hardenable grade, combining good corrosion resistance and formability characteristics with useful mechanical properties. Its ability to resist nitric acid attack permits its use in specific chemical applications but automotive trim and appliance components represents its largest fields of application.
IPv6 Network Supported
