904L stainless steel wire mesh made from stainless steel (type 904L). Ideal for using for hive bottoms. Eyes size is 3,15 mm, wire diameter 0,8 mm. Lenght of roll is 1 meter. Price is for one meter (1bm).
310S stainless steel coil is an austenitic chromium-nickel stainless steel with excellent oxidation and corrosion resistance, which also has high temperature resistance. It has much better strength,and has good high temperature resistance due to the higher percentage of chromium and nickel.
904L stainless steel combines molybdenum and copper with iron for tremendously increased resistance to reducing acids like sulphuric acid. It stands up extremely well to chlorides in the environment for low pitting and crevice corrosion, as well as stress corrosion cracking.
Grade 430 is a ferritic, straight chromium, non-hardenable grade, combining good corrosion resistance and formability characteristics with useful mechanical properties. Its ability to resist nitric acid attack permits its use in specific chemical applications but automotive trim and appliance components represents its largest fields of application.
Alloy 321 (UNS S32100) is stabilized stainless steel plate which offers as its main advantage an excellent resistance to intergranular corrosion following exposure to temperatures in the chromium carbide precipitation range from 800 to 1500°F (427 to 816°C). Alloy 321 stainless steel plate is stabilized against chromium carbide formation by the addition of titanium.
Type 304 Stainless Steel Plate is the most versatile and widely used stainless steel. It is still known by its old name 18/8, which is derived from the nominal composition of type 304, which is 18% chromium and 8% nickel. Type 304 stainless steel is an austenitic grade that can be deep drawn to extreme depths.
316L stainless steel is more resistant to corrosion than 316 stainless steel. There may be no difference in everyday applications. However, because of its weldability, 316L is regarded as the superior corrosion resistance option. 316Ti is essentially 316 with some titanium (Ti) added to reduce the risk of corrosion resistance loss in the heat-affected zone. To avoid this, the carbon(C) level can be reduced, resulting in the grade 316L.
310S stainless steel plate is an austenitic chromium-nickel stainless steel with excellent oxidation and corrosion resistance, as well as high temperature resistance. It has much better strength, can work continuously at high temperatures, and has good high temperature resistance due to the higher percentage of chromium and nickel.
316L stainless steel is more resistant to corrosion than 316 stainless steel. There may be no difference in everyday applications. However, because of its weldability, 316L is regarded as the superior corrosion resistance option. 316Ti is essentially 316 with some titanium (Ti) added to reduce the risk of corrosion resistance loss in the heat-affected zone. To avoid this, the carbon(C) level can be reduced, resulting in the grade 316L.
Type 201 Stainless Steel Sheet/Plate is an austenitic chromium-nickel-manganese stainless steel developed in the 1950s as a result of global nickel shortages. Manganese and nitrogen are partially substituted for nickel in the Type 201 composition. Our 201 stainless steel has excellent impact resistance. It is also extremely tough in cold weather. This grade has about 30% higher yield strength than 301 stainless steel (another popular choice), while maintaining the same ductility.
IPv6 Network Supported
